The TX Series 24 inch L.C. Series of Industrial Pneumatic Forklifts were engineered and designed with emphasis on service and operator personnel at the forefront. The TX Series provides standard features like for instance more head room and leg room, shock mounted center mounted operator station, tilt steering wheel, CANbus technology for increased leg and head room and operator comfort and convenience, along with fingertip electric joystick controls. The TX Series is available in 5 various wheel bases, so there is definitely a particular unit right for your specific use.
All controls have integrated solid state controllers utilizing J1939 CANbus technology. This set up allows sensors and controllers the ability to communicate with minimal wiring between the components. Like for example, I/O modules are chosen to add consistency to the machine control system and utilized to reduce electromechanical relay devices.
The J1939 CANbus technology enables all machine data to be accessed through the main color display that is situated inside of the cab. This specific display shows spreader status lights, engine data together with warnings and man and equipment interface data. The equipment functions could be tuned through the main display in the cab. Also, the display allows service employees to access data required while troubleshooting. Like for example, data like controller outputs and sensor status. So as to avoid operator access, the tuning functions are password protected.
The TX Series forklifts have all been equipped with an electronic turbocharged Tier Certified Cummins, which is an after cooled or charge air to air diesel engine. Amongst the standard engine features comprise electronic diagnostic monitor, maintenance monitor, transmission/engine protection systems, water/fuel separator, less emissions and better fuel economy.
The TX Series has a transmission that is a 3-speed, fully reversing, modulated powershift transmission. The inching powershift transmission and the electric roll shift control as well as a separate air-to-oil cooler. All of these features make a strong and effective equipment which is highly reliable on the jobsite.