In nearly all situations, most individuals spend quite a bit of money purchasing their forklift. Hence, it is very essential to take proper care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures that are undertaken during taking care of and maintaining this machine.
By starting up the forklift and listening carefully how it works is one of the best ways to tell how good the engine is performing. For instance, if there are any misses or knocks, the machine is defective and this should raise several issues. Moreover listen carefully for any squealing noise that come from the belts since these noises would provide you with a lot of information.
Several of the main parts requiring attention during maintenance include the gauges, horn, safety warning devices, the lights and the overhead guard. Any faulty parts or burnt out light bulbs need to be replaced as soon as they are noticed. It is also essential to check the wiring.
After the above parts have been checked thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery has to be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The fuel filters, hydraulic filter and the transmission filter should be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be done. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Then, check each and every other component of the equipment including the wheels. If any kind of fault or concern is detected, be sure to address it immediately so as to make certain the equipment is running at its safest and optimum levels.