Stock Number: 2-18-UEF37
Make: Misc
Model: FORKS
Year: 0


Stock Number: 300052
Make: Manitou
Model: MH25-4T
Year: 2015


Stock Number: 2-18-UEATT-91
Make: Misc
Model: OVERHEAD GAURD
Year: 0


Stock Number: 206857
Make: Jungheinrich
Model: ECR 327A
Year: 2012


Stock Number: 2-18-UEF100
Make: Misc
Model: FORKS
Year: 0


Stock Number: ATT394
Make: Misc
Model: 60" Class III Pallet Forks
Year: 0


Stock Number: 231768
Make: Magnum
Model: MLT4060
Year: 2013


Stock Number: 2-18-UEATT-55
Make: Misc
Model: Truss Jib- manitou
Year: 0


Stock Number: 2-18-09B3603M
Make: FLX
Model: FLX20012600S1H
Year: 0


Stock Number: EQC006145
Make: Exide
Model: WG1-12-380
Year: 0


Stock Number: EQC005976
Make: Skyjack
Model: SJIII4632
Year: 2008


Stock Number: 2-18-UEATT-42
Make: Misc
Model: Manbasket
Year: 0


 
Snorkel Knuckle Boom Lift

Snorkel Knuckle Boom Lift

The knuckle boom crane is quite similar to a standard crane with one key distinction. The boom can fold back similar to a finger. In essence, the boom articulates at the "knuckle" near the center. This allows the machine to be able to transform into a compact size for maneuvering and storage.

Typically, the arm on a knuckle boom crane is somewhat a little lighter than boom truck cranes. The crane arm is designed to allow more payloads to be carried on the back of the mounted vehicle. Most knuckle boom cranes are mounted behind the cab. This leaves the entire bed of the truck empty.

Interestingly enough, smaller models of knuckle boom cranes are capable of being utilized without a certified crane operator, so long as the maximum capacity is less than 15,000 pounds or if the maximum boom length is less than 25 feet long.

Control systems for these cranes are normally different. Some could control from the ground, radio remote control, stand up and seated control. The radio remote systems are capable of running the crane and starting it. Moreover, numerous models come outfitted with a computer readout system which immediately provides system readouts reporting if the crane is overloaded or not.

Personnel Lifts
Personnel lifts designed by Snorkel have been made to help contractors and maintenance professionals perform tasks at elevated heights. These lifts are inexpensive, lightweight, portable work platforms made for interior use. The patented Girder Lock mast design by Snorkel provides excellent reach and superb stability. This system, used in the UL Series, provides excellent lift capacity.

Snorkel's PAM Series and UL Series Personnel lifts are made so that only one person is required to operate the equipment. These equipment can be transported easily. They could easily be pushed into position smoothly and pass through a standard sized doorway. These lifts are capable of being erected in minutes and could provide working heights of up to 46 feet, they are an efficient alternative to scaffold towers.

  • Terex Container Forklift
    Terex construction equipment has earned a worldwide reputation for being powerful, dependable and effective. These equipment are ... More
  • Hyster Loaded Container Handlers
    It is suggested to often inspect the front end of your lift truck as part of your pre-shift or daily inspection, in order to help avoid ... More
  • Nissan Double Reach Forklifts
    Narrow aisle trucks or reach trucks have become more common because of their ability to lessen their floor space and aisle count needs. ... More
  • Terex Knuckle Boom Lifts
    Telescoping Boom Lifts Telescoping booms lifts are designed to mount a work bucket on an extendable, straight arm that is located on a ... More
  • Potain Self Erect Cranes
    For big building construction projects, tower cranes are utilized quite often. These machines are rather necessary for heavy lifting as ... More