Stock Number: 211391
Make: JLG
Model: 3246ES
Year: 2011


Stock Number: EQU006196
Make: Taylor
Model: TH350L
Year: 2003


Stock Number: 2-15-075468
Make: Genie
Model: RL4
Year: 2013


Stock Number: 211155
Make: Genie
Model: S125
Year: 2010


Stock Number: EQU005192
Make: Genie
Model: GTH1056
Year: 2011


Stock Number: 2-18-UEF90
Make: Misc
Model: FORKS
Year: 0


Stock Number: 2-18-UEATT-16
Make: Misc
Model: CARRIAGE
Year: 0


Stock Number: EQU001836
Make: Hyster
Model: H155FT
Year: 2012


Stock Number: 2-18-UEATT-58
Make: Misc
Model: MAST
Year: 0


Stock Number: EQU002931
Make: Hyster
Model: H60FT
Year: 2011


Stock Number: 2-18-UEATT
Make: Manitou
Model: 60" Forks
Year: 0


Stock Number: EQU005201
Make: Genie
Model: GTH844
Year: 2011


 
Komatsu IC Forklift

Komatsu IC Forklift

Forklift Basics
Forklifts are really handy equipment. The machinery are normally small vehicles with numerous attachments which enable it to lift and move loads. Factories and warehouses all around the world would utilize forklifts. A forklift operator needs to acquire special training, especially because these types of machinery operate on rear-wheel drive and this could be hard to get used to until one is familiar with it. Because the forklift carries its load at the front, the center of gravity is always shifting and this results in the equipment being unstable quite often.

Parts
Normally, a forklift operator usually sits in an area referred to as the "cat." This particular area offers metal protection that stretches overhead similar to a roof. On the front of the machine, the mast is situated. The mast is the mechanism that lowers and raises the load utilizing hydraulic cylinders.

Forklift Parts
When looking for information on lift truck parts and aftermarket lift truck components, it is a good idea to check out the World Wide Web or your local phone book. Numerous places provide various forklift components, forklift accessories and support products.

Structural Parts
The overhead guard is part of the forklift's top portion, while the foot guard separates the load from the cabin. A counterweight is located at the rear of the forklift and is installed there in an effort to keep the machine from falling over.

The blades and Apron
The load apron is usually responsible for keeping the cargo positioned correctly on the metal arms, or forks, cradle the cargo. The forks could be tilted in order to balance the load. This is accomplished utilizing the hydraulic hoist arm and the tilting ram that powers the upward fork movement.

The Lift Structure
The load apron guard extends above the apron. It works to keep the cargo balanced when the forks carry it along the track of the arms of the upright.

Mechanics
The forklift's internal engine enables power to be sent to the wheels of the equipment. This is what moves the forklift. The wheels have brakes installed in order to enable the operator the chance to stop or slow down the machinery as needed.

Controls
Lifting loads is operated utilizing hoist controls which are located inside the cat. The forklift is driven by using the steering wheel to turn, similar to a car or truck.

Load Rating Plate
This plate is located inside the cabin. This load rating plate details the weight restrictions for each particular forklift.

  • Terex Container Forklift
    Terex construction equipment has earned a worldwide reputation for being powerful, dependable and effective. These equipment are ... More
  • Hyster Loaded Container Handlers
    It is suggested to often inspect the front end of your lift truck as part of your pre-shift or daily inspection, in order to help avoid ... More
  • Nissan Double Reach Forklifts
    Narrow aisle trucks or reach trucks have become more common because of their ability to lessen their floor space and aisle count needs. ... More
  • Terex Knuckle Boom Lifts
    Telescoping Boom Lifts Telescoping booms lifts are designed to mount a work bucket on an extendable, straight arm that is located on a ... More
  • Potain Self Erect Cranes
    For big building construction projects, tower cranes are utilized quite often. These machines are rather necessary for heavy lifting as ... More