Stock Number: 211758
Make: JLG
Model: 860SJ
Year: 2012

Stock Number: 212376
Make: JLG
Model: 860SJ
Year: 2014

Stock Number: 232246
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 2-12-3555C
Make: Skyjack
Model: SJIII4632
Year: 2006

Stock Number: 208364
Make: CAT
Model: DP40N1
Year: 2015

Stock Number: EQU005189
Make: Genie
Model: GTH1056
Year: 2011

Stock Number: 202750
Make: Jungheinrich
Model: EKS 314
Year: 2005

Stock Number: EQU006476
Make: CAT
Model: GC55KSTR
Year: 2012

Stock Number: EQU006453
Make: Genie
Model: Z80/60
Year: 2010

Stock Number: 2-18-UEF101
Make: Misc
Model: FORKS
Year: 0

Stock Number: ATT157
Make: Manitou
Model: 60" Forks
Year: 2008

Stock Number: 205434
Make: AisleMaster
Model: 44SE
Year: 2010

Kalmar Dual Fuel Forklifts

Kalmar Dual Fuel Forklifts

In nearly all situations, most individuals spend quite a bit of money purchasing their forklift. Hence, it is very essential to take proper care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures that are undertaken during taking care of and maintaining this machine.

By starting up the forklift and listening carefully how it works is one of the best ways to tell how good the engine is performing. For instance, if there are any misses or knocks, the machine is defective and this should raise several issues. Moreover listen carefully for any squealing noise that come from the belts since these noises would provide you with a lot of information.

Several of the main parts requiring attention during maintenance include the gauges, horn, safety warning devices, the lights and the overhead guard. Any faulty parts or burnt out light bulbs need to be replaced as soon as they are noticed. It is also essential to check the wiring.

After the above parts have been checked thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery has to be checked so as to ensure the fill level is topped up to the regulated amount.

The next step is to drain all of the oil out of the machine and after that change the filters. The fuel filters, hydraulic filter and the transmission filter should be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.

When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be done. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Then, check each and every other component of the equipment including the wheels. If any kind of fault or concern is detected, be sure to address it immediately so as to make certain the equipment is running at its safest and optimum levels.

  • Terex Container Forklift
    Terex construction equipment has earned a worldwide reputation for being powerful, dependable and effective. These equipment are ... More
  • Hyster Loaded Container Handlers
    It is suggested to often inspect the front end of your lift truck as part of your pre-shift or daily inspection, in order to help avoid ... More
  • Nissan Double Reach Forklifts
    Narrow aisle trucks or reach trucks have become more common because of their ability to lessen their floor space and aisle count needs. ... More
  • Terex Knuckle Boom Lifts
    Telescoping Boom Lifts Telescoping booms lifts are designed to mount a work bucket on an extendable, straight arm that is located on a ... More
  • Potain Self Erect Cranes
    For big building construction projects, tower cranes are utilized quite often. These machines are rather necessary for heavy lifting as ... More